+44 (0)333 666 1176
(click any image to enlarge)
Product Code: TDS3
The TDS3 time delay switch provides timed control for lighting, heating and ventilation loads. They are simple to install and easy to operate. The 3-wire switch requires a Neutral and Live connection (but does not require a minimum load to be connected) and can be used either to replace an existing light switch, or on new installations. The unit will fit into all British Standard single-gang pattress boxes with a minimum depth of 20mm.
The time delay switches are very easy to use; touching the touch-sensitive button with a finger will turn on the connected load. The load will be automatically switched off after the pre-selected delay has elapsed, or after the user cancels the function by momentarily holding their finger on the button. The time delay can be adjusted via an internal thumbwheel from 6 seconds to 60 minutes. Other time delay periods are available upon request at time of purchase (3 seconds to 30 minutes, 12 seconds to 120 minutes).
The TDS3 can also be supplied with an illuminated touch-sensitive pushbutton to ensure that they are easily located in the dark. The LED will turn off once the load has been switched on. Product code TDS3-L.
The time delay switches are ideal for multi-way switching using specially designed slave units which provide additional touch-sensitive switches. Product code TDS-S.
The touch-sensitive buttons on the switches removes the presence of a mechanical pushbutton thereby making it vandal resistant, plus with the use of special fixing screws the unit can also be made tamperproof. Product code MSD-154.
Stylish, easy to install and operate the TDS3 provides an accurate and cost effective solution to reducing energy consumption.
Ideal applications
Download product datasheet (2840Kb)
£20.50 (ex. VAT)
Product Code: IPTDS3
The IP65 Rated Time Delay Switches have been designed to switch external lighting and heating on at the press of a button and automatically off after a pre-determined duration has elapsed. read more
Product Code: PCTDS3
The PCTDS Pull Cord Time Delay Switches provide timed control for lighting, heating and ventilation loads in areas where standard electrical switches are not allowed. They are simple to install and are available in either 2-wire (PCTDS2) or 3-wire (PCTDS3) versions. read more
Product Code: TDS-S
The TDS-S is for use with the TDS2 and TDS3 time delay switches to provide multi-way switching. The time delay switches provide timed control for lighting, heating and ventilation loads. They are simple to install and easy to operate. The unit will fit into all British Standard single-gang pattress boxes with a minimum depth of… read more
Product Code: TDS2
The TDS2 Time Delay Switch provides timed control for lighting, heating and ventilation loads. It is simple to install and does not require a mains Neutral connection and so can directly replace an existing light switch (providing the minimum load limit is satisfied). The time delay switches are very easy to use; touching the touch-sensitive… read more
Product Code: TDS3-L
The TDS3-L time delay switch with LED indicator provides timed control for lighting, heating and ventilation loads. They are simple to install and easy to operate. The 3-wire switch requires a Neutral and Live connection (but does not require a minimum load to be connected) and can be used either to replace an existing light… read more
| Power supply | 230V AC 50Hz (live/neutral) |
| Output switch rating | 16A, 250V AC (resistive) |
| Output switch type | Volt-free SPST (normally open) relay |
| Time delay selection | 6 seconds to 60 minutes |
| Maximum lighting load | Incandescent 12A (2500W) |
| Suitable for | 20mm (or deeper) single-gang UK pattress box |
| Guarantee | 5 Years |
| Weight | 88g |
| Dimensions | 86mm x 86mm x 26.9mm |
Product Code: MSD-154
A set of 2 replacement tamperproof screws (raised-countersunk M3.5 x 25mm) that are compatible with all our electrical faceplate style products, as well as other products which use a British Standard faceplate form factor. read more
Product Code: MSD-200
A 32mm surface-mounted British Standard pattress box, ideal for use when retrofitting our ranges of wall mounted extension timers, humidistats and time delay switches. read more
© Copyright MS Electronics Ltd 2018
today, tomorrow and in the future
