RTDS3 - Remote Time Delay Switch 3-Wire

(click any image to enlarge)

RTDS3 Remote Tamperproof Time Delay Switch 3 Wire

Product Code: RTDS3

The RTDS3 Remote Tamperproof Time Delay Switch provides timed control for lighting, heating and ventilation loads. They are simple to install and easy to operate.  The 3-wire switch requires a Neutral and Live connection (but does not require a minimum load to be connected) and can be used either to replace an existing light switch, or on new installations.  The unit will fit into all British Standard single-gang pattress boxes with a minimum depth of 20mm.

The remote time delay switches are designed for installations that require a time delay switch with a remotely located pushbutton or an interface to another control system such as a BMS. They are therefore supplied with a bare faceplate which is vandal resistant and tamperproof and can be conveniently installed away from the load it is switching.

The load is turned on and the time delay is activated by momentarily shorting the internally located electrical contacts. The load will automatically switch off after the pre-selected delay has elapsed. The time delay can be adjusted via an internal thumbwheel from 6 seconds to 60 minutes.  Other time delay periods are available upon request at time of purchase (3 seconds to 30 minutes, 6 seconds to 60 minutes, 12 seconds to 120 minutes).

Select between:
RTDS2: 2-wire version (Live In, Live Out), no neutral wire needed. Please note a minimum load of 40W is required. Power factor correction capacitors may be required for compact fluorescent installations.
RTDS3: 3-wire version (Live, Neutral, Output), mains neutral required. No minimum load restrictions apply.

Download product datasheet (2750Kb)

Product features:

  • 10 Amp switching capacity
  • 5 year guarantee
  • Energy-saving product
  • Money-saving product
  • Selectable timer / timeout
  • Suitable for heating control
  • Suitable for lighting control
  • Suitable for ventilation control

£24.00 (ex. VAT)

Add to basket

RTDS2 - Remote Time Delay Switch 2-Wire

RTDS2 Remote Tamperproof Time Delay Switch 2 Wire £24.00

Product Code: RTDS2

The RTDS Remote Tamperproof Time Delay Switches provide timed control for lighting, heating and ventilation loads. They are simple to install and are available in either 2-wire (RTDS2) or 3-wire (RTDS3) versions. read more

Add to basket

TDS3 Time Delay Switch for Lighting Control - automatically turns lights off ensuring they are not left on, wasting energy and money

TDS3 Time Delay Switch 3 Wire £20.50

Product Code: TDS3

The TDS3 time delay switch provides timed control for lighting, heating and ventilation loads. They are simple to install and easy to operate.  The 3-wire switch requires a Neutral and Live connection (but does not require a minimum load to be connected) and can be used either to replace an existing light switch, or on… read more

Add to basket

Power supply

230V AC 50Hz (live/neutral)

Output switch rating

16A, 250V AC (resistive)

Output switch type

Volt-free SPST (normally open) relay

Time delay selection

6 seconds to 60 minutes

Maximum lighting load

Incandescent 12A (2500W)
Fluorescent 10A (2000W)
Compact Fluorescent 10A (2000W)

Suitable for

20mm (or deeper) single-gang UK pattress box

Guarantee

5 years

Weight

80g

Dimensions

86mm x 86mm x 26.9mm

MSD-200 Single-Gang Surface Pattress Box (32mm deep)

MSD-200 Single-Gang Surface Pattress Box (35mm deep) £1.50

Product Code: MSD-200

A 35mm surface-mounted British Standard pattress box, ideal for use when retrofitting our ranges of wall mounted extension timers, humidistats and time delay switches. read more

out of stock - call us for availability