+44 (0)333 666 1176
(click any image to enlarge)
Product Code: E915/24V/RS
The E915/24V/RS offers a calibration-free, high quality solution to tamperproof humidity control. It utilises a high-accuracy humidity sensor in conjunction with its robust die-cast aluminium case and tamperproof screws to ensure vandal-resistant yet accurate tamperproof energy control.
The E915/24V/RS regulates to a fully adjustable relative humidity set-point between 5% and 95%, combined with an adjustable relative humidity hysteresis (differential) of anything between 1% and 10%.
The humidistat provides accurate humidity control by controlling loads of up to 10A such as ventilation, humidification and dehumidification equipment.
24 Volt (/24V)
This humidistat is designed to operate from a 24 volt (AC or DC) power source (instead of the standard operating voltage of 230V AC). This is primarily used for low-voltage systems.
Remote Sensor (/RS)
This humidistat is designed to be operated in conjunction with a remotely located humidity sensor and therefore does not include the integral humidity sensor within the humidistat body. This provides additional flexibility so that the humidity sensor can be optimally located in the room while the humidistat body is mounted where it is necessary to do so, in a riser cupboard.
A choice of standard remote sensors are available, but we can also accommodate to your custom enclosures – please contact us to discuss your requirements with one of our design engineers.
* NOTE – A remote sensor MUST be selected from the accessories section in addition to the main humidistat unit.
Download product datasheet (1910Kb)
£68.50 (ex. VAT)
Product Code: E915
The E915 offers a calibration-free, high quality solution to tamperproof humidity control. It utilises a high-accuracy humidity sensor in conjunction with its robust die-cast aluminium case and tamperproof screws to ensure vandal-resistant yet accurate tamperproof energy control. read more
Product Code: E915/24V
The E915/24V offers a calibration-free, high quality solution to tamperproof humidity control. It utilises a high-accuracy humidity sensor in conjunction with its robust die-cast aluminium case and tamperproof screws to ensure vandal-resistant yet accurate tamperproof energy control. read more
Product Code: E915/RS
The E915/RS offers a calibration-free, high quality solution to tamperproof humidity control. It utilises a high-accuracy humidity sensor in conjunction with its robust die-cast aluminium case and tamperproof screws to ensure vandal-resistant yet accurate tamperproof energy control. read more
| Power Supply: | 220V – 240V AC 50Hz (live/neutral/earth) |
| Output switch rating: | 10A @ 230V AC 50Hz (resistive) |
| Output switch type: | Changeover relay (volt-free) |
| Humidity control: | 5% RH to 95% RH |
| Humidity differential: | 1%RH to 10%RH |
| Sensor drift: | Less than 2%RH over 5 years (no calibration required) |
| Guarantee: | 5 Years |
| Weight: | 0.33Kg |
| Dimensions mm: | 120mm x 95mm x 36.5mm |
Product Code: MSD-152
Tamperproof screwdriver for MSD-153 tamperproof screws. Required to gain access into the entire Robust Range of Tamperproof thermostats and humidistats. read more
Product Code: MSD-225
An MSD-151 humidity sensor installed in a white plastic box and connected to a terminal block. Pre-drilled mounting holes allow easy installation anywhere internally within a building. read more
© Copyright MS Electronics Ltd 2020
today, tomorrow and in the future
