+44 (0)333 666 1176
(click any image to enlarge)
Product Code: E818
The E818 Robust Thermostat with remote control input regulates room temperatures to two different temperatures, a low temperature ‘Set-Back’ and a higher boost temperature ‘Setpoint’.
Instead of a pushbutton which is used to toggle between the two temperature levels, the E818 utilises a Remote Control Input which selects between the high and low temperature levels through the user making and breaking the two remote control contacts.
Typical interfaces to the Remote Control Input may be through a time clock, PIR motion detector, BMS relay output, mechanical toggle switch, magnetic door, extension timer, time delay switch contact etc. This unique feature can eliminate the user interface for switching between the high and low modes, so providing an effective solution to the automation of heating areas that are infrequently occupied.
Robust Range Variants:
Remote Sensor (/RS)
Remotely located temperature sensor.
Frost (/F)
-2°C to +12°C thermostatic control range.
24 Volt (/24V)
Powered by 24 volt (AC or DC) supply.
*For a full description please see relevant variation below.
Download product datasheet (1911Kb)
£81.70 (ex. VAT)
Product Code: E818/24V
Like our E816 standard Set-Back Thermostat, the E818/24V regulates room temperatures to two different temperatures, a low temperature ‘Set-Back’ and a higher boost temperature ‘Setpoint’. read more
Product Code: E818/24V/F
Like our E816 standard Set-Back Thermostat, the E818/24V/F regulates room temperatures to two different temperatures, a low temperature ‘Set-Back’ and a higher boost temperature ‘Setpoint’. read more
Product Code: E818/24V/F/RS
Like our E816 standard Set-Back Thermostat, the E818/24V/F/RS regulates room temperatures to two different temperatures, a low temperature ‘Set-Back’ and a higher boost temperature ‘Setpoint’. read more
Product Code: E818/24V/RS
Like our E816 standard Set-Back Thermostat, the E818/24V/RS regulates room temperatures to two different temperatures, a low temperature ‘Set-Back’ and a higher boost temperature ‘Setpoint’. read more
Product Code: E818/F
Like our E816 standard Set-Back Thermostat, the E818/F regulates room temperatures to two different temperatures, a low temperature ‘Set-Back’ and a higher boost temperature ‘Setpoint’. read more
Product Code: E818/F/RS
Like our E816 standard Set-Back Thermostat, the E818/F/RS regulates room temperatures to two different temperatures, a low temperature ‘Set-Back’ and a higher boost temperature ‘Setpoint’. read more
Product Code: E818/RS
Like our E816 standard Set-Back Thermostat, the E818/RS regulates room temperatures to two different temperatures, a low temperature ‘Set-Back’ and a higher boost temperature ‘Setpoint’. read more
| Power supply | 220V – 240V AC 50Hz (live/neutral/earth) |
| Output switch rating | 10A, 250V AC (resistive) |
| Output switch type | Changeover relay (volt-free) |
| Temperature control | [high setpoint]: +12°C to +26°C |
| Sensor accuracy | ±0.2°C |
| Sensor drift | ±0.15°C over 5 years |
| Guarantee | 5 Years |
| Weight | 0.31Kg |
| Dimensions | 120mm x 95mm x 35mm |
Product Code: E314
The E314 is a single-shot programmable extension timer with delay which is designed to control part, or all of a heating, lighting or air-conditioning system outside normal occupancy hours. A voltage-free 16A relay output is switched on for a configurable time period after a delay period has elapsed, thus enabling plant equipment to be automatically… read more
Product Code: E315
The E315 is a single-shot extension timer designed to control part, or all of a heating, lighting or air-conditioning system outside normal occupancy hours. It is housed in a single-gang British Standard faceplate form factor with touch-sensitive pushbuttons and LED displays. read more
Product Code: MSD-152
Tamperproof screwdriver for MSD-153 tamperproof screws. Required to gain access into the entire Robust Range of Tamperproof thermostats and humidistats. read more
Product Code: MSD-224
An MSD-150 temperature sensor installed in a white plastic box and connected to a terminal block. Pre-drilled mounting holes allow easy installation anywhere internally within a building. read more
Product Code: TDS3
The TDS3 time delay switch provides timed control for lighting, heating and ventilation loads. They are simple to install and easy to operate. The 3-wire switch requires a Neutral and Live connection (but does not require a minimum load to be connected) and can be used either to replace an existing light switch, or on… read more
© Copyright MS Electronics Ltd 2021
today, tomorrow and in the future
