+44 (0)333 666 1176
(click any image to enlarge)
Product Code: E315/24V
The E315/24V is a single-shot programmable plant extension timer designed to control part, or all of a heating, lighting or air-conditioning system outside normal occupancy hours. It is housed in a single-gang British Standard faceplate form factor with touch-sensitive pushbuttons and LED displays.
A voltage-free 16A relay output is switched on for a configurable time period. The unit’s automatic power saving mode will dim the LEDs after the unit has been inactive for two minutes.
The E315/24V is an extremely user-friendly device that provides effective energy control and beneficial time-management of personnel is obtained through the fully configurable “Extension” period which is adjustable from 0.5 hours to 99 hours (steps of 0.5 hours up to 9.5, then steps of 1 hour thereafter). A maximum limit for the Extension time can be programmed, ensuring the end-user cannot generate an extension longer than the authorised user allows. When not in use, the extension timer enters a power-saving standby mode in an effort to reduce its energy usage.
Other E315/24V Plant Extension Timer Variants Also Available:
230 Volt (mains)
Powered by 230 volt (AC or DC) supply.
Download product datasheet (1391Kb)
£60.00 (ex. VAT)
Product Code: E312/24V
Our plant extension timer will operate HVAC equipment outside of normal system operating times. Touch sensitive buttons and intuitive functionality make it easy to use and operate. A remote start facility is included as standard which means that the extension will not commence until a signal is received. read more
out of stock - call us for availability
Product Code: E314/24V
The E314/24V is a single-shot programmable extension timer with delay designed to control part, or all of a heating, lighting or air-conditioning system outside normal occupancy hours. A voltage-free 16A relay output is switched on for a configurable time period after a delay period has elapsed, thus enabling plant equipment to be automatically activated at… read more
Product Code: E315
The E315 is a single-shot extension timer designed to control part, or all of a heating, lighting or air-conditioning system outside normal occupancy hours. It is housed in a single-gang British Standard faceplate form factor with touch-sensitive pushbuttons and LED displays. read more
| Power supply: | 18V – 28V AC or DC |
| Output switch rating: | 16(8)A, 250V AC (resistive) |
| Output switch type: | SPNO relay (volt-free) |
| Output terminals | 3.3mm2 solid/stranded wire, rising clamp |
| Operating temperature: | -10°C to +40°C |
| Guarantee: | 3 Years |
| Suitable for: | 22mm (or deeper) single-gang UK pattress box |
| Ingress protection rating | IP40 |
| Weight: | 95g |
| Dimensions mm: | 86mm x 86mm x 26.9mm |
Product Code: MSD-154
A set of 2 replacement tamperproof screws (raised-countersunk M3.5 x 25mm) that are compatible with all our electrical faceplate style products, as well as other products which use a British Standard faceplate form factor. read more
Product Code: MSD-200
A 32mm surface-mounted British Standard pattress box, ideal for use when retrofitting our ranges of wall mounted extension timers, humidistats and time delay switches. read more
out of stock - call us for availability
© Copyright MS Electronics Ltd 2022
today, tomorrow and in the future
