+44 (0)333 666 1176
(click any image to enlarge)
Product Code: E314/24V
The E314/24V is a single-shot programmable extension timer with delay designed to control part, or all of a heating, lighting or air-conditioning system outside normal occupancy hours.
A voltage-free 16A relay output is switched on for a configurable time period after a delay period has elapsed, thus enabling plant equipment to be automatically activated at the correct time in the future without any user being present. The unit’s automatic power saving mode will dim the LED displays after the unit has been inactive for two minutes.
Effective energy control and beneficial time-management of personnel is obtained through the fully configurable “Delay” and “Extension” periods. The Delay period is adjustable from 0.5 hours to 99 hours (steps of 0.5 hours up to 9.5, then steps of 1 hour thereafter) and the “Extension” period is adjustable from 1 to 9 hours (steps of 1 hour). Maximum limits for both the Delay and Extension times can be programmed, ensuring the end-user cannot generate delays or extensions longer than the authorised user allows. When not in use, the extension timer enters a power-saving standby mode in an effort to reduce its energy usage.
24 Volt (/24V)
This extension timer is designed to operate from a 24 volt (AC or DC) power source (instead of the standard operating voltage of 230V AC). This is primarily used for safety or low-voltage systems.
Download product datasheet (1350Kb)
£45.00 (ex. VAT)
Product Code: E314
The E314 is a single-shot programmable extension timer with delay which is designed to control part, or all of a heating, lighting or air-conditioning system outside normal occupancy hours. A voltage-free 16A relay output is switched on for a configurable time period after a delay period has elapsed, thus enabling plant equipment to be automatically… read more
| Power supply | 18V – 28V AC or DC |
| Output switch rating | 16(8)A, 250V AC (resistive) |
| Output switch type | SPNO relay (volt-free) |
| Output terminals | 3.3mm2 solid/stranded wire, rising clamp |
| Operating temperature | -10°C to +40°C |
| Guarantee | 5 Years |
| Suitable for | 22mm (or deeper) single-gang UK pattress box |
| Ingress protection rating | IP40 |
| Weight | 97g |
| Dimensions mm | 86mm x 86mm x 26.9mm |
Product Code: MSD-154
A set of 2 replacement tamperproof screws (raised-countersunk M3.5 x 25mm) that are compatible with all our electrical faceplate style products, as well as other products which use a British Standard faceplate form factor. read more
Product Code: MSD-200
A 35mm surface-mounted British Standard pattress box, ideal for use when retrofitting our ranges of wall mounted extension timers, humidistats and time delay switches. read more
