(click any image to enlarge)
DH-1/50 Duct Humidistat 50mm probe
Product Code: DH-1/50
The DH-1 duct humidistat delivers accurate electronic control of humidity levels in HVAC ventilation ducts. Capable of switching loads of up to 10A at 250V AC, it is ideally suited to the control of ventilation, humidification and dehumidification equipment; such as extract fans, boost controls, override controls, alarms, etc.
The DH-1 is calibration-free and accurate to within 3% RH. The high-accuracy humidity sensor is housed in a robust, corrosion-proof 50mm* probe, delivering consistent accuracy and maintenance free** operation.
The DH-1 regulates to a fully adjustable relative humidity set-point between 5% and 95% and a relative humidity hysteresis (differential) which is fully adjustable between 1% and 10%.
* Maintenance free in clean airflow. Any accumulation of dust or debris on the protective mesh filter may be removed by vacuuming.
**Please note this product is now supplied with a black probe.
Variants:
24 Volt (/24V)
Powered by 24 volt (AC or DC) supply.
*For a full description please see relevant variation below.
Download product datasheet (2502Kb)
Product features:
- 10 Amp switching capacity
- 5 year guarantee
- Energy-saving product
- Money-saving product
- Suitable for humidity control
- Suitable for ventilation control
- Tamper-proof features
- Very robust and rugged product
Product Code: DH-1/100
The DH-1 is calibration-free and accurate to within 3% RH. Capable of switching loads of up to 10A at 250V AC, it is ideally suited to the control of ventilation, humidification and dehumidification equipment; such as extract fans, boost controls, override controls, alarms, etc. read more
Add to basket
Product Code: DH-1/200
The DH-1 is calibration-free and accurate to within 3% RH. Capable of switching loads of up to 10A at 250V AC, it is ideally suited to the control of ventilation, humidification and dehumidification equipment; such as extract fans, boost controls, override controls, alarms, etc. read more
Add to basket
Product Code: DH-1/24V
The DH-1 is calibration-free and accurate to within 3% RH. Capable of switching loads of up to 10A at 250V AC, it is ideally suited to the control of ventilation, humidification and dehumidification equipment; such as extract fans, boost controls, override controls, alarms, etc. The duct humiditstat is powered from a 24V AC or DC supply. read more
Power supply | 220V – 240V AC 50Hz (live/neutral)
|
Output switch rating | 10A, 250V AC (resistive)
|
Output switch type | Changeover relay (volt-free)
|
Cable entry | Pre-fitted M20 gland, for 5 to 13mm dia. round cable (remove reducer insert for >7.5mm).
May be exchanged for a M20 conduit connector
|
Humidity control | 5% RH to 95% RH
|
Humidity differential | 1% RH to 10% RH
|
Sensor accuracy | ±3% RH
|
Sensor drift | ±1.2% RH over 5 years (no calibration required)
|
Probe length | 50mm
|
Guarantee | 5 Years
|
Weight | 210g
|
Dimensions (with standard probe) | 109mm x 82mm x 258mm
|